ICOM IC-7100 D-STAR - HF/VHF/UHF all mode transceiver with 100W output power
The IC-7100's touchscreen lets you navigate the menu and provides easy access to all the device's functions.
Contoured control panel
The angled panel makes it easier to use the transceiver's buttons and knobs, while the screen remains perfectly visible and accessible
D-STAR system
The IC-7100 also allows operation in the D-STAR system.
Of course, besides D-STAR emission, it also supports operation in USB, LSB, CW, RTTY, AM, FM, and WFM modes.
ICOM IC-7100 technical specifications
- Receive frequency range:
- 0.030–199.999
- 400.000–470.000
- Transmit frequency range:
- 1.810–1.999
- 3.500–3.800
- 7.000–7.200
- 10.100–10.150
- 14.000–14.350
- 18.068–18.168
- 21.000–21.450
- 24.890–24.990
- 28.000–29.700
- 50.000–52.000
- 70.000–70.500
- 144.000–146.000
- 430.000–440.000
- Modulation:
- USB,
- LSB
- CW
- RTTY,
- AM,
- FM,
- WFM (Rx only)
- Number of memory channels:
- 505 (495 regular, 4 call, 6 scan edges)
- 700 (D-STAR repeater channels)
- Antenna connector:
- SO-239×2 (for HF/50MHz 50Ω)
- SO-239×2 (for VHF/UHF 50Ω)
- Operating temperature range:
- –10°C to +60°C
- +14°F to +140°F
- Frequency stability: better than ±0.5ppm (+0°C to +50°C)
- Power supply: 13.8V DC ±15%
- Current consumption (at 13.8V DC):
- at maximum transmit power: 22A
- during reception, maximum volume: 1.5A
- on standby: 1.2A
- Dimensions:
- main unit: 167×58×225 mm
- controller: 165×64×78.5 mm
- Weight:
- main unit 2.3 kg
- controller 0.5 kg
Transmitter:
- Output power (at 13.8V DC):
- HF/50MHz: 2 - 100W
- 144MHz: 2 - 50W
- 430/440MHz: 1 - 35W
- AM 1–40W
- Spurious emissions:
- < –50dB (HF bands)
- < –63dB (50MHz)
- < –60dB (144/430MHz)
- Carrier suppression: >50dB
- Unwanted sideband suppression: >50dB
Intermediate frequencies:
- SSB/CW/AM/FM 124.487MHz, 455kHz, 36kHz
- WFM 134.732MHz, 10.700MHz
Receiver:
- Spurious and image frequency rejection ratio
- >70dB (HF bands)
- >65dB (50/144/430MHz)
- (except for the intermediate frequency on the 144MHz band)
- Audio output power (at 13.8V DC): >2.0W (10% distortion, 8Ω)
Standard accessories:
- HM-198 microphone
- power cable
- CW keyer plug
- spare fuses
- OPC-223 separation cable
- 13-pin DIN cable
- USB cable
ICOM IC-7100 - downloads:
"""
